Press Release

Fig. 1: DUAL LINE c-SI – the system platform designed for a throughput of up to 3600 solar cells per hour

Fig. 2: StarFemto FX

Fig. 3: StarPico

ROFIN Sees Rising Demand for Laser Systems to Enhance Solar Cell Efficiency

PV manufacturers and the supplying industry are going through tough times since the beginning of 2012. Until today, the photovoltaic sector faces a dramatic shake-out. Most solar cell makers have been posting losses which led to a dramatic reduction of investments.

Being one of the world's largest industrial laser manufacturers with diversified business segments, ROFIN weathered the storm without problems. More than that, the laser specialist now sees indications for a recovery of the PV market.

New orders for laser systems for PERC processing and selective emitter processes

ROFIN recently faced an increasing demand for laser systems to enhance crystalline solar cell efficiency. Lately laser systems for PERC processing as well as selective emitter processes were ordered for R&D labs and high volume production lines. Certainly ordering levels do not compare to previous levels, but obviously lasers are recognized as an indispensable tool to enhance cell efficiency above 20% for mono-crystalline and 18% for multi-crystalline cells and modules.

Lasers optimize C-Si solar cell processing in many ways

ROFIN systems process C-Si solar cells in many aspects: PERC processing, selective emitter, laser fired contacts, metal wrap through, marking and cutting;  the first two of which are currently the most important. A highest efficiency gain of up to 1% (absolute) can be realized on standard solar cells with a PERC cell design architecture. Due to continued application research and cooperation with material suppliers, ROFIN can also recommend suitable Aluminum pastes for the PERC process. This is perfectly complemented by a selective emitter structure via laser doping of PSG (Phosphor Silicate Glass) into the Silicon surface, adding another 0.3% efficiency gain. Laser doping widths of less than 200 micron significantly enlarge the total area with reduced recombination and better blue light response.

DUAL LINE C-SI - the laser system for highest throughput in solar cell manufacturing

ROFIN successfully introduced fully integrated laser manufacturing systems for rear side passivation, selective emitter and MWT processes to high volume c-Si cell manufacturers over the last 3 years. Recent orders also included new installations of DUAL LINE c-Si machines specifically for PERC cell processes. The core of the machine is a high precision granite base to support the laser optics and rapid wafer handling units. Features are a standardized HMI software, gentle wafer handling for highest yields, and a powerful PLC system allowing a throughput range of 1800 – 3600 wafers per hour. The system can be placed in-line with other processing machines or configured with stack and/or cassette handling systems for batch type operation. The whole range of ROFIN laser sources in 1064, 532 and 355 nm wavelengths and various pulse length regimes from continuous wave to femtosecond are available addressing high cell efficiency processes. Therefore ROFIN always has the perfect match for existing and new production processes for the solar industry.

Optimization with ROFIN's new ultrashort pulse lasers StarFemto FX and StarPico

Maintenance-free, high-energy ultrashort pulse lasers, like StarPico and StarFemto FX, will enhance PV manufacturing in many ways.

The patterning of CI(G)S thin-film cells relies on high quality P1, P2, and P3 scribes. Better quality scribes will immediately lead to significantly smaller dead zones and higher module efficiency. Each scribing process addresses a different thin film (metallic back contact, CIGS absorber material, TCO) and has its own challenges. However, picosecond lasers offer superior processing quality for all three scribes, namely a sharper ablation profile, less molten CIGS and complete avoidance of layer separation and micro cracks.

Regarding crystalline solar cell manufacturing, ultrashort pulse lasers have already shown their potential for structuring SiO2 and SiN layers and edge isolation. Current ablation processes on solar cells are mainly based on indirect ablation. The laser energy is transmitted through the transparent dielectric layer and absorbed in the topmost layers of silicon. To shift ablation closer to the direct absorption, laser pulses must be as short as possible to maximize pulse peak power and minimize heat impact to the layer underneath. Recent studies, performed by ISC - Konstanz with a ROFIN StarFemto FX laser source, showed that laser ablation with negligible damage of the silicon underneath the ablated dielectric layer can be performed. 

With local sales and service offices worldwide and a staff of more than 2000 employees ROFIN is best positioned to support PV custome

Meet ROFIN: 

October 01 – 03, 2013 Paris / FRANCE hall no. 2 / booth E15 

             Press Contact

ROFIN-BAASEL Lasertech          ROFIN-BAASEL Lasertech 

Solar Industry

Richard Hendel       Susanne Lötzsch

Phone: +49-(0)8151-776-4345      Phone: +49-(0)8151-776-4220

e-mail: e-mail: